View SP916_7735559.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sp716/SP916 1 / 20 sp716 SP916 service manual
sp716/SP916 2 / 20 table of contents warning --------------------------------------------------------------- ----------------------- 3 a. important safety instruction -------------------------------------- 3 b. specifications --------------------------------------------------------------- ------ 4 c. timing chart --------------------------------------------------------------- --------- 6 d. adjustment procedure ----------------------------------------------------- 8 e. trouble shooting hints --------------------------------------------------- 9 f. block diagram --------------------------------------------------------------- ---- 13 g. exploded diagram ------------------------------------------------------------- 14 h. schematic diagram ----------------------------------------------------------- 16 i. pcb layout diagram ---------------------------------------------------------- 17
sp716/SP916 3 / 20 warning to prevent from fire or shock hazard,do not expose monitor to any rain or any form of water.high voltage is inside the monitor so please do not remove the back c over of the cabinet if you are not a qualified monitor engineer.contact the local dealer or the nearest proview branch office if you need help. a. important safety instruction prior to using this service manual,please ensure that you have carefully followed all the procedures outlined in the user's manual for this product. 1. read all of these instructions. 2. save these instructions. 3. follow all warnings and instructions marked on the product. 4. unplug this product from the wall outlet before cleaning.do not use liquid cleaner or aerosol cleaner, use a damp cloth for cleaning. 5. do not use this product near water. 6. do not place this product on an unstable cart,st and or table.the product may fall,causing serious damage to the product. 7. slots and openings in the cabinet and the back or bottom are provided for ventilation,to ensure reliable operation of the product and to pr otect it from overheating.those openings must not be blocked or covered.the ope nings should never be bl ocked by placing the product on a bed,sofa, rug, or other similar surface.this product should not be placed in a built-in installation,since proper ventilation is provided. 8. this products should be operate d with the type of power source indicated on the marked label. if you are not sure of the type of power is availa ble, consult with your dealer or local power company. 9. this product is equipped with a 3-wire gr ounding type plug,a plug having a third (grounding) pin.this plug will only fit into a grounding-ty pe power outlet.this is a safety feature.if you are unable to insert the plug into the outlet,cont act your electrician to replace your obsolete outlet.do not damage the purpose of the grounding-type plug. 10. do not allow anything to rest on the power cord.d o not locate this product where persons will walk on the cord. 11. never push any kinds of objects into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock.never spill any kinds of liquid on the product. 12. do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risk.refer all servicing to service personnel. 13. unplug this product from the wall outlet and refe r servicing to qualified service personnel under the following conditions. a. when the power cord or plug is damaged or frayed. b. if liquid has been spilled into the product. c. if the product has been exposed to rain or water. d. if the product does not operate normally,when the operating instructions are followed.adjust only those controls involved in the operati ng instructions ,since improper adjustment of other controls may result in damage a nd will often require extra work by a qualified technician to restore the product to normal operation. e. if the product has been dropped or the cabinet has been damaged. f. if the product exhibits a distinct change in performance,indicating a need for service.
sp716/SP916 4 / 20 b. specifications sp716 panel general specification screen diagonal 17? tft model name cmo m170e5-p01 active display area 337.92(h) 270.34(v) mm pixel pitch 0.264(h) x 0.264(v) mm number of colors 16.2m colors view angle horizontal vertical +/-70 degree +/-60 degree typical luminance of white 250cd/m2(min.) contrast ratio (typical) 450:1 maximum resolution 1280 x 1024 @ 75hz recommend resolution 1280 x 1024 @ 75hz synchronization range horizontal vertical 30 ? 80 khz 60? 75 hz pixel rate 135 mhz user control 5 key switch osd function auto, brightness, contrast, h-position, v-position, h-size, phase, reset, color selection (r, g, b, cool, warm), osd , language, exit. power source 90 ? 264 vac 60 / 50 hz power consumption 48 w (max.) connection type 15 pin d-sub type; input signal video sync. d-sub: analog r.g.b. , 0.7vp-p / 75 ohms ttl level,positive or negative polarity color temperature cool / warm / user mode dimension (wxhxd) 378.4x382x192 (mm) monitor weight 3.8 kg base operation tilt -5 / + 15 degree power saving on stand by off 48w 3w 3w signal connector pin assignment d-sub pin no. 1. red video 6. red ground 11. gnd 2.green video 7. green ground 12. sda for ddc2b 3.blue video 8. blue ground 13. h-sync. 4.gnd 9. vga +5v 14. v-sync-ddc1 5.self test 10. sync. gnd 15. scl for ddc2b sound output no audio
sp716/SP916 5 / 20 SP916 panel general specification panel model hannstar hsd190me12-a00 screen diagonal 19? tft active display area 376.32mm (h) x 301.056mm (v) pixel pitch 0.294(h) x 0.294(v) mm number of colors 16.2m colors view angle horizontal vertical +/-70 degree -60/+70 degree typical luminance of white 250cd/m2(typical) contrast ratio (typical) 500:1 maximum resolution 1280 x 1024 @ 75hz recommend resolution 1280 x 1024 @ 75hz synchronization range horizontal vertical 30 ? 80 khz 60? 75 hz pixel rate 135 mhz user control 5 key switch osd function auto, brightness, contrast, h-position, v-position, h-size, phase, reset, color selection (r, g, b, cool, warm), osd , language, exit. power source 90 ? 264 vac 60 / 50 hz power consumption 50 w (max.) connection type 15 pin d-sub type; input signal video sync. d-sub: analog r.g.b. , 0.7vp-p / 75 ohms ttl level,positive or negative polarity color temperature cool / warm / user mode dimension (wxhxd) 426.4x 417x210 (mm) monitor weight 4.6 kg base operation tilt -5 / + 15 degree power saving on stand by off 50w 3w 3w signal connector pin assignment d-sub pin no. 1. red video 6. red ground 11. gnd 2.green video 7. green ground 12. sda for ddc2b 3.blue video 8. blue ground 13. h-sync. 4.gnd 9. +5v from pc 14. v-sync-ddc1 5.self test 10. sync. gnd 15. scl for ddc2b sound output no audio
sp716/SP916 6 / 20 c . timing chart video a : period d b e b: active c: sync width sync. d: back porch c a e: front porch preset modes vga 640x400 vga 640x480 vesa 640x480 vesa 640x480 vga 720x400 vesa 800x600 vesa 800x600 vesa 800x600 dot rate 25.175mhz 25.175mhz 31.500mhz 31.500mhz 28.322mhz 36.000mhz 40.000m hz 50.000mhz f.h 31.469khz 31.469khz 37.861khz 37.500khz 31.469khz 35.156khz 37.879k hz 48.077khz a-period 31.778us 31.778us 26.413us 26.667us 31.777us 28.444us 26.400us 20.8 00us b-active 25.422us 25.422us 20.317us 20.317us 25.422us 22.222us 20.000us 16.0 00us c-syn 3.813us 3.813us 1.270us 2.032us 3.813us 2.000us 3.200us 2.400us d-back porch 1.907us 1.589us 3.810us 3.810us 1.907us 3.556us 2.200us 1.280us e-front porch 0.636us 0.954us 1.016us 0.508us 0.635us 0.666us 1us 1.12us f . v 70.087hz 59.941hz 72.810hz 75.000hz 70.087hz 56.250hz 60.317hz 72.1 88hz a-period 14.268ms 16.683ms 13.734ms 13.333ms 14.268ms 17.778ms 16.579ms 13.8 53ms b-active 12.711ms 15.253ms 12.678ms 12.800ms 12.711ms 17.067ms 15.840ms 12.4 80ms c-syn 0.064ms 0.064ms 0.079ms 0.080ms 0.064ms 0.057ms 0.106ms 0.125ms d-back porch 1.112ms 0.794ms 0.528ms 0.427ms 1.112ms 0.626ms 0.607ms 0.478ms e-front porch 0.381ms 0.572ms 0.449ms 0.026ms 0.381ms 0.028ms 0.026ms 0.77ms h/v sync interlaced non non non non non non non non
sp716/SP916 7 / 20 preset modes vesa 800x600 vesa 1024x768 vesa 1024x768 vesa 1024x768 vesa 1280x1024 vesa 1280x1024 dot rate 49.500mhz 65.000mhz 75.000mhz 78.750mhz 108.00mhz 135.00mhz f.h 46.875khz 48.363khz 56.476khz 60.023khz 63.98khz 79.976khz a-period 21.333us 20.677us 17.707us 16.660us 15.630us 12.504us b-active 16.162us 15.754us 13.653us 13.003us 11.852us 9.481us c-syn 1.616us 2.092us 1.813us 1.219us 1.037us 1.067us d-back porch 3.232us 2.462us 1.920us 2.235us 2.296us 1.837us e-front porch 0.323us 0.369us 0.321us 0.203us 0.444us 0.119us f . v 75.000hz 60.004hz 70.069hz 75.029hz 60.020hz 75.025hz a-period 13.333ms 16.666ms 14.272ms 13.328ms 16.661ms 13.329ms b-active 12.800ms 15.880ms 13.599ms 12.795ms 16.005ms 12.804ms c-syn 0.064ms 0.124ms 0.106ms 0.050ms 0.047ms 0.038ms d-back porch 0.448ms 0.600ms 0.513ms 0.466ms 0.594ms 0.475ms e-front porch 0.021ms 0.062ms 0.054ms 0.017ms 0.016ms 0.013ms h/v sync interlaced non non non non non non
sp716/SP916 8 / 20 d. adjustment procedure item p rogram menu. | test meter ~ test point pattern operation check value a power supply check | digital voltmeter ~con 001 crosshatch pattern (1280x768, 60hz) 1. plug power cable into the lcd monitor directly. 2. make sure the voltage of the power plug (con001) on the power board to the value shown at right. 220vac 0.2v b power saving check | wattmeter | pc or pattern generator crosshatch pattern (1280x768, 60hz) 1. unplug the signal cable into the monitor. 2. turn the power switch of the monitor on . 3. check monitor power indicator light up blue flashing every other second. 4. make sure the wattmeter value shown at right. 5. osd will be display ? no signal ? picture. ? 3w c into factory mode | pc or pattern generator crosshatch pattern (1280x768, 60hz) 1. hold down key,then turn the power switch of the monitor off . 2. hold up key,then turn the power switch of the monitor on . 3. you can enter factory adjustment mode. d auto mode check | pc or pattern generator crosshatch pattern (1280x768, 60hz) 1. press and release the auto key to adjust display mode to its utmost performance according to vga setting. e white balance adjust | pc or pattern generator white pattern (1280x768, 60hz) 1. move the osd to the color mode ( auto color). 2. set color is cool using the osd ,check the value shown at right. y = 20020cd/m^2 x = 0.2830.02 y = 0.2970.02 3. set color is warm using the osd ,check the value shown at right. y = 20020cd/m^2 x = 0.3130.02 y = 0.3290.02 f osd language setting | pc or pattern generator 1. move the osd to the osd setting mode 2. move the osd to the language mode . 3. you can choose one of the language you need.
sp716/SP916 9 / 20 e . trouble shooting hints no no yes yes yes yes no no high voltage ! no yes yes no no yes no displa y ( black ) led on ? push the power on/off switch led color change ? check main board u5/pin24 hi / lo under push power sw? back light on? to step 2 make sure the connection of power board is fine +12v ? check the cn1 /pin1,2 of p ower board check power board b display ? nice job ! a to step 2 power supply ? change power board
sp716/SP916 10 / 20 no yes yes no yes no b hi / lo under push power sw? change the power board display ? nice job ! to step 2 a check the connection o f con1 cable display ? nice job ! change the main board change the main board check the main board 12v input? check the main board +5.0 v ? check i1,i2 check f1 no no yes c yes
sp716/SP916 11 / 20 no yes no yes no yes no check the main board 3.3v input ? check h/v input signal ? check u3/pin37,38 check i2 check 2.5 v input display ? nice job ! change signal cable yes check i1 c
sp716/SP916 12 / 20 no yes no yes no yes no yes no display (white) check the main board 5v ? +3.3v ? h/v input signal ? check u3/pin37,38 display ? nice job ! change signal cable check i1,i2 check i2
sp716/SP916 13 / 20 f. block diagram vga in r g b hsync vsync scl sda a/d_board r g b hsync vsync key on/off right left right left 12v 5v bri control sda sda data&clk&vcc lcd panel ccfl data&clk&vcc control board key audio out(option) left right audio in(option) left right power board ccfl 220/110v 12v on/off 5v bri control speaker interface
sp716/SP916 14 / 20 g. exploded diagram
sp716/SP916 15 / 20
sp716/SP916 16 / 20 h. schematic diagram
5 5 4 4 3 3 2 2 1 1 d d c c b b a a title size document number rev date: sheet of top level e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 17 tuesday, june 28, 2005 title size document number rev date: sheet of top level e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 17 tuesday, june 28, 2005 title size document number rev date: sheet of top level e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 17 tuesday, june 28, 2005 check by prepare by approve by top level 1. s1:the first version of the cost down model,mstar solution 2.change note:audio schematic add d13 d2?power schematic add r4?c101 change tc5 y 3.dvi schmatic add r8,r12.power schmatic add r18. 200-100-m713i-e
5 5 4 4 3 3 2 2 1 1 d d c c b b a a bl_ctrl brt_level bl_ctrl brt_level vcc2v5 4 vcc3v3 4,5,6 vcc5v vcc5v vcc3v3_panel vcc5v vlcd vlcd12v vcc2v5 vcc3v3 +5v +12v +12v +5v vcc5v vcc3v3_panel +5v +12v +5v bklt_adj 4 bklt_en 6 panelvcc_en 6 panel12v_en 6 title size document number rev date: sheet of power e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 27 tuesday, june 28, 2005 title size document number rev date: sheet of power e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 27 tuesday, june 28, 2005 title size document number rev date: sheet of power e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 27 tuesday, june 28, 2005 to inverter check by prepare by approve by changed in 2004.8.30 add r4 and r18 changed 2004.9.10 added by lotuschou 20041111 200-100-m713i-e c12 0.1uf c12 0.1uf r16 4k7 r16 4k7 r14 1k r14 1k c9 0.1uf(nc) c9 0.1uf(nc) c11 0.1uf c11 0.1uf i1 aic1084-18ce i1 aic1084-18ce adj 1 vout 2 vin 3 tab 4 r10 np r10 np r4 100 r4 100 f1 24v/5a f1 24v/5a d12 d4001 d12 d4001 c2 0.1uf c2 0.1uf 1 1 r15 100k(nc) r15 100k(nc) r1 33k r1 33k s1 s1 2 1 + tc3 220uf/16v + tc3 220uf/16v + tc4 220uf/25v + tc4 220uf/25v d11 d4001 d11 d4001 r18 100 r18 100 q2 mmbt3904 q2 mmbt3904 3 1 2 c15 0.1uf c0603 c15 0.1uf c0603 1 1 r6 100k r6 100k c6 0.1uf c6 0.1uf 1 1 r5 1k r5 1k i2 aic1084-33cm i2 aic1084-33cm adj 1 vout 2 vin 3 tab 4 q3 np q3 np 3 1 2 1 1 c1 0.1uf c1 0.1uf fb1 1206 mlb-201209-0220p-n2 fb1 1206 mlb-201209-0220p-n2 1 2 r39 0 r39 0 r11 np r11 np r7 np r7 np r13 22k r13 22k s2 s2 2 1 l1 bead l1 bead c14 0.1uf c14 0.1uf c5 1u c5 1u u1 si9933-so8(9435) u1 si9933-so8(9435) s1 1 g1 2 s2 3 g2 4 d1 8 d1 7 d2 6 d2 5 r9 np r9 np + tc6 220uf/25v + tc6 220uf/25v s4 s4 2 1 s3 s3 2 1 c3 0.1u c3 0.1u tc1 47uf/25v tc1 47uf/25v c17 0.1uf c0603 c17 0.1uf c0603 c7 0.1uf c7 0.1uf tc2 47uf/25v tc2 47uf/25v r3 0r r3 0r f1a 125v/5a f1a 125v/5a c4 0.1uf c4 0.1uf r2 4.7k r2 4.7k q1 mmbt3904 q1 mmbt3904 3 1 2 c13 0.1uf c13 0.1uf cn1 header5x2 cn1 header5x2 1 2 3 4 5 6 7 8 9 10 fb3 1206 mlb-201209-0220p-n2 fb3 1206 mlb-201209-0220p-n2 1 2 q4 mmbt3904 q4 mmbt3904 1 2 3
5 5 4 4 3 3 2 2 1 1 d d c c b b a a scl_d1 ddc_clk ddc_dat ddc_dat ddc5v ddc_clk r+ b- g+ r- b+ clk+ g- clk- hsync_in vsync_in hpdet_d1 data1- data2- data2+ data1+ vga_ddc5v ddc5v dvi_ddc5v ddc5v b+ g- r- r+ clk+ b- clk- g+ data0+ clk+ data0- sda_d1 clk- b g r data0+ data1- sda_d1 data0- b scl_d1 gnd clk- hsync_in r gnd vsync_in gnd g hpdet_d1 gnd gnd clk+ gnd gnd gnd data1+ data2+ data2- ddc5v vga_ddc5v ddc5v dvi_ddc5v u_gnd vcc5v vcc5v vcc5v vcc5v vcc5v vcc5v dvi_ddc5v vga_ddc5v dvi_5v ddc5v ddc5v vcc5v vcc5v dcc5v dcc5v dcc5v vcc5v dvi_5v u_gnd ddc_dat1 6 ddc_clk1 6 ddc_dat 6 ddc_clk 6 r 1 l 1 gndg 4 gin 4 rin 4 bin 4 gndb 4 sog 4 gndr 4 vsync 4 hsync 4 st_det1 6 ddc_wp 6 b- 4 g- 4 clk+ 4 clk- 4 r- 4 r+ 4 b+ 4 g+ 4 l 1 r 1 title size document number rev date: sheet of vga in(dvi_ pigtail) e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 37 tuesday, june 28, 2005 title size document number rev date: sheet of vga in(dvi_ pigtail) e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 37 tuesday, june 28, 2005 title size document number rev date: sheet of vga in(dvi_ pigtail) e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 37 tuesday, june 28, 2005 add r8 and r12 check by prepare by approve by 200-100-m713i-e d3 5.6v d3 5.6v c77 0.1uf c77 0.1uf r24 2k2 r24 2k2 d9 bav99 d9 bav99 3 2 1 c76 0.1uf c76 0.1uf r219 10r r219 10r c81 0.1uf c81 0.1uf r35 20 r35 20 r224 100 r224 100 r220 10r r220 10r r27 33 r27 33 r213 100 ? r213 100 ? q204 2n3906 q204 2n3906 b e c d5 esd d5 esd cn5 rout cn5 rout 1 2 3 r205 100k r205 100k u2 at24c21 u2 at24c21 nc 1 nc 2 nc 3 gnd 4 sda 5 scl 6 vclk 7 vcc 8 r36 75_1% r36 75_1% d23 bav99 d23 bav99 3 2 1 r221 10r r221 10r r201 3.3k r201 3.3k r30 47 r30 47 c80 0.1uf c80 0.1uf c82 0.1uf c82 0.1uf r225 100 r225 100 d28 bav99 d28 bav99 3 2 1 r22 100 r22 100 d27 mmbd7000 d27 mmbd7000 3 2 1 c22 47nf c22 47nf c75 0.1uf c75 0.1uf c71 0.1uf c71 0.1uf q203 2n3904 q203 2n3904 b e c r211 33 r211 33 d24 bav99 d24 bav99 3 2 1 d26 bav99 d26 bav99 3 2 1 r26 33 r26 33 r33 470 r33 470 c74 0.1uf c74 0.1uf r34 47 r34 47 c26 47nf c26 47nf d25 bav99 d25 bav99 3 2 1 c84 20u c84 20u c83 20u c83 20u r222 100 r222 100 r212 33 r212 33 r8 nc 100 r8 nc 100 c70 0.1uf c70 0.1uf c23 1000pf c23 1000pf c21 47nf c21 47nf r29 75_1% r29 75_1% c30 nc c30 nc d101 esd d101 esd q202 2n3904 q202 2n3904 b e c r28 20 r28 20 c25 47nf c25 47nf d6 esd d6 esd r37 47 r37 47 r12 nc 100 r12 nc 100 r210 10k r210 10k r17 100 r17 100 r207 10k r207 10k c72 0.1uf c72 0.1uf d7 bav99 d7 bav99 3 2 1 c24 nc c24 nc r202 33k/nc r202 33k/nc c73 0.1uf c73 0.1uf r214 10r r214 10r fb5 sbk160808t-300y-s fb5 sbk160808t-300y-s r206 33k r206 33k q201 2n3906 q201 2n3906 b e c r23 10k r23 10k fb6 sbk160808t-300y-s fb6 sbk160808t-300y-s r215 10r r215 10r u6 at24c21 u6 at24c21 nc 1 nc 2 nc 3 gnd 4 sda 5 scl 6 vclk 7 vcc 8 c31 47nf c31 47nf r203 10k r203 10k c20 nc c20 nc r209 33k/nc r209 33k/nc r208 3.3k r208 3.3k r216 10r r216 10r r31 20 r31 20 r204 2.2k r204 2.2k fb4 sbk160808t-300y-s fb4 sbk160808t-300y-s r32 75_1% r32 75_1% d8 bav99 d8 bav99 3 2 1 r217 10r r217 10r cn2 phd 2.0/90d cn2 phd 2.0/90d 2 4 6 8 10 12 14 16 18 20 22 24 26 28 1 3 5 7 9 11 13 15 17 19 21 23 25 27 d4 5.6v d4 5.6v c19 47nf c19 47nf r21 10k r21 10k bat54c d1 bat54c d1 1 2 3 d30 bav99 d30 bav99 3 2 1 r19 10k r19 10k r20 10k r20 10k r223 100 r223 100 r218 10r r218 10r d29 bav99 d29 bav99 3 2 1
5 5 4 4 3 3 2 2 1 1 d d c c b b a a hwreset hsync gndb gndr gndg gin bin vsync rin int sog bklt_adj r- clk- g+ b- r+ clk+ g- b+ vcc3v3 vdd2v5 vdpll vcc2v5 vdvi vcc3v3 vdpll vcc3v3 vdvi vpo vdvi vpll vad vdd2v5 vad vcc3v3 vpll vcc3v3 vcc3v3 vpo int 6 hwreset 6 volume 7 ga4 5 load 5 ad2 6 rb4 5 lvackp 5 ba7 5 stv2 5 oclk 5 gb6 5 ra3 5 ad3 6 stv1 5 ga7 5 rb5 5 bb7 5 bb3 5 ga5 5 gb7 5 ba6 5 ale 6 lvackm 5 gb3 5 bb6 5 ad1 6 ra7 5 sth 5 rb3 5 ra4 5 ba4 5 wrz 6 ga2 5 ba5 5 gb2 5 bb5 5 ra6 5 rb2 5 ba3 5 rb7 5 eclk 5 bb4 5 ra5 5 ba2 5 rb6 5 ra2 5 gb4 5 bb2 5 ga3 5 pol 5 ga6 5 gb5 5 ad0 6 hsync 3 rin 3 vsync 3 gndg 3 sog 3 gin 3 gndb 3 gndr 3 bin 3 bklt_adj 2 lvb2m 5 lvb2p 5 lvb3p 5 esp 5 oe 5 g+ 3 b+ 3 b- 3 clk+ 3 clk- 3 g- 3 r- 3 r+ 3 cpv 5 rdz 6 title size document number rev date: sheet of mst scaler e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 47 tuesday, june 28, 2005 title size document number rev date: sheet of mst scaler e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 47 tuesday, june 28, 2005 title size document number rev date: sheet of mst scaler e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 47 tuesday, june 28, 2005 pin 6:low- serial bus pin 6:high- direct bus r51 52 62 63 change to rn16 check by prepare by approve by 200-100-m713i-e c43 0.1uf c43 0.1uf c32 0.1uf c32 0.1uf fb10 pby160808t-600y-s fb10 pby160808t-600y-s fb8 pby160808t-600y-s fb8 pby160808t-600y-s c42 0.1uf c42 0.1uf c48 10nf c48 10nf r43 47 r43 47 c85 47pf c85 47pf r44 47 r44 47 c34 0.1uf c34 0.1uf r45 47 r45 47 c86 47pf c86 47pf c45 0.1uf c45 0.1uf c40 0.1uf c40 0.1uf r41 47r r41 47r c36 0.1uf c36 0.1uf r46 47 r46 47 r42 10k r42 10k tc7 10uf/16v tc7 10uf/16v c56 0.1uf c56 0.1uf fb12 pby160808t-600y-s fb12 pby160808t-600y-s c38 0.1uf c38 0.1uf c87 47pf c87 47pf tc8 10uf/16v tc8 10uf/16v r47 10k r47 10k c52 22pf c52 22pf c53 0.1uf c53 0.1uf c33 0.1uf c33 0.1uf r25 47r r25 47r r38 47r r38 47r r48 47r r48 47r u3 mst tsu16ak/tsu56ak u3 mst tsu16ak/tsu56ak rin0 63 gin0 60 sogin0 61 bin0 58 rin0m 62 gin0m 59 bin0m 57 hsync0 37 vsync0 38 rext 52 refp 66 refm 67 hwresetz 32 int 72 pwm0 73 pwm1 74 lvackm/nc 107 avdd 55 avdd_mpll 35 avdd 45 bypass 3 avdd 51 vddp 11 vddp 21 vddp 84 vddp 94 vddp 104 vddp 114 vddp 126 vddc 18 vddc 87 vddc 97 vddc 117 avss 39 avss 56 avss_mpll 36 avss_mpll 2 avss_pll 54 avss 42 gndp 10 gndp 20 gndp 85 gndp 95 gndp 115 gndp 127 gndc 19 gndc 86 gndc 96 gndp 105 gndc 116 xin 33 xout 34 lva2p/ra2 108 lva2m/ra3 109 lva1p/ra4 110 lva1m/ra5 111 lva0p/ra6 112 lva0m/ra7 113 nc 118 nc/gpo9 119 nc/oclk 120 nc/eclk 121 osp 76 esp 75 nc/bb2 124 nc/bb3 125 nc/bb4 128 nc/bb5 1 ddc1_clk/gpo8 29 ddc1_dat/gpo7 28 avdd_pll 53 avdd 65 avss 64 avss 48 lvackp/nc 106 lva3m/ga7 103 lva3p/ga6 102 avss 68 ad1 77 ad2 78 rdz / scl 71 wrz / sda 70 ale / cs 69 bus type 6 ad3/gpo5 31 ad0/gpo6 30 nc/bb6 4 nc/bb7 5 nc/ga5 101 nc/ga4 100 nc/ga2 98 nc/ga3 99 nc/ba2 88 nc/ba3 89 nc/ba4 90 nc/ba5 91 nc/ba6 92 nc/ba7 93 nc/rb2 16 nc/rb3 17 nc/rb4 22 nc/rb5 23 nc/rb6 24 nc/rb7 25 nc/gb2 8 nc/gb3 9 nc/gb4 12 nc/gb5 13 nc/gb6 14 nc/gb7 15 nc/gpo0 83 nc/gpo1 82 nc/gpo2 81 nc/gpo3 80 nc/gpo4 79 lvb2p 122 lvb2m 123 ck- 50 ck+ 49 r+ 40 r- 41 g+ 43 g- 44 b+ 46 b- 47 tc9 10uf/16v tc9 10uf/16v c41 0.1uf c41 0.1uf c46 0.1uf c46 0.1uf fb9 pby160808t-600y-s fb9 pby160808t-600y-s c47 0.1uf c47 0.1uf c35 0.1uf c35 0.1uf tc10 10uf/16v tc10 10uf/16v fb11 pby160808t-600y-s fb11 pby160808t-600y-s tc12 10uf/16v tc12 10uf/16v c39 0.1uf c39 0.1uf c37 0.1uf c37 0.1uf fb7 pby160808t-600y-s fb7 pby160808t-600y-s x1 14.318mhz x1 14.318mhz tc11 10uf/16v tc11 10uf/16v c49 22pf c49 22pf c50 47p c50 47p c44 0.1uf c44 0.1uf c54 0.1uf c54 0.1uf r40 390_1% r40 390_1% c51 47p c51 47p
5 5 4 4 3 3 2 2 1 1 d d c c b b a a vcc3v3 dhs_ttl rxo2+ lvb2p rxo2- lvb2m ba3 rxe2- rxo0- rb5 rxo1- rb3 rxoc- eclk lvackp rxec+ ga7 rxe3- ba7 rxe0- rxo3+ lvb3p rxe1+ ba4 lvackm rxec- rxe3+ ga6 ba5 rxe1- rxe2+ ba2 rxo1+ rb2 vcc_test rxo3- stv2 rxo0+ rb4 rxoc+ oclk rxe0+ ba6 bg0n gb7 b0p bb6 bg0p gb6 br1n rb5 bg2n gb3 b2p bb2 br2p rb2 bg1p gb4 b0n bb7 b1n bb5 bg2p gb2 br2n rb3 b1p bb4 bclkp dclk_ttl br0p rb6 bg1n gb5 b2n bb3 bclkn den_ttl br0n rb7 br1p rb4 sth-a fb2p ba2 hms fr2n ra3 pol pol-a esp fr2p ra2 oe oe-a stv stv1-a cpv-a clkv fr1n ra5 fb1n ba5 fr0p ra6 fg2n ga3 fg1p ga4 fg1n ga5 fb0n ba7 fclkn stv2-a fb1p ba4 fg2p ga2 fg0p ga6 fb2n ba3 fr0n ra7 fg0n ga7 fb0p ba6 lp load-a sth fr1p ra4 fclkp dhs_ttl mcu_od_en vcc_test vcc3v3 2,4,6 vlcd vcc3v3 vlcd12v vlcd lvb3p 4 esp 4 rb2 4 rb3 4 rb4 4 rb5 4 rb6 4 rb7 4 ra2 4 ra3 4 ra4 4 ra5 4 ra6 4 ra7 4 gb2 4 gb3 4 gb4 4 gb5 4 gb6 4 gb7 4 bb2 4 bb3 4 bb4 4 bb5 4 bb6 4 bb7 4 ga2 4 ga3 4 ga4 4 ga5 4 ga6 4 ga7 4 ba2 4 ba3 4 ba4 4 ba5 4 ba6 4 ba7 4 sth 4 oe 4 stv1 4 cpv 4 pol 4 load 4 stv2 4 oclk 4 eclk 4 lvb3p 4 lvb2m 4 lvb2p 4 lvackm 4 lvackp 4 mcu_od_en title size document number rev date: sheet of panel interface e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 57 tuesday, june 28, 2005 title size document number rev date: sheet of panel interface e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 57 tuesday, june 28, 2005 title size document number rev date: sheet of panel interface e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 57 tuesday, june 28, 2005 for 19" fsc panel for rsds interface for rsds interface check by prepare by approve by 3/31 modify 6 200-100-m713i-e r56 0(nc) r56 0(nc) jp1 header 12x2 jp1 header 12x2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 cn3 (nc)6702-50-50p-r cn3 (nc)6702-50-50p-r 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 r54 0(nc) r54 0(nc) r52 0(nc) r52 0(nc) r53 0(nc) r53 0(nc) c60 10pf(nc) c60 10pf(nc) r57 0(nc) r57 0(nc) r51 0(nc) r51 0(nc) r50 0(nc) r50 0(nc) c61 10pf(nc) c61 10pf(nc) cn4 nc cn4 nc 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 r49 10k (nc) r49 10k (nc) r55 0(nc) r55 0(nc) c59 0.1uf c59 0.1uf
5 5 4 4 3 3 2 2 1 1 d d c c b b a a up down power sda1 menu scl1 auto ledo led_g led_o ledg scl1 sda1 auto ledg ledo down up menu power mcu mcu vcc3v3 mcu mcu mcu mcu mcu vcc5v vcc5v vcc5v vcc5v mcu mcu mcu int 4 ddc_dat 3 mute 7 panelvcc_en 2 hwreset 4 ale 4 rdz 4 wrz 4 ad3 4 ad2 4 ad1 4 ad0 4 bklt_en 2 ddc_clk 3 panel12v_en 2 ddc_wp 3 ddc_dat1 3 ddc_clk1 3 st_det1 4 mcu_od_en title size document number rev date: sheet of mcu(sync&myson 512&mx) e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 67 tuesday, june 28, 2005 title size document number rev date: sheet of mcu(sync&myson 512&mx) e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 67 tuesday, june 28, 2005 title size document number rev date: sheet of mcu(sync&myson 512&mx) e mstar costdwon(dvi_i pigtail) lvds&rsds out custom 67 tuesday, june 28, 2005 rs232 debug to key pad nc check by prepare by approve by 3/31 modify 5 20050428 200-100-m713i-e c8 0.1uf c8 0.1uf rn13 10k rn13 10k 1 2 3 4 5 6 7 8 r74 8.2k r74 8.2k d33 esd d33 esd r70 1k r70 1k r72 10k r72 10k rn6 10k rn6 10k 1 2 3 4 5 6 7 8 c66 22pf c66 22pf rn5 10k rn5 10k 1 2 3 4 5 6 7 8 r68 10k r68 10k d34 esd d34 esd s9 s9 2 1 d31 esd d31 esd y1 11.0592mhz y1 11.0592mhz d10 1n4148 d10 1n4148 rn10 22 rn10 22 1 2 3 4 5 6 7 8 r66 100 r66 100 c68 22pf c68 22pf r62 330 r62 330 u4 24c16 u4 24c16 a0 1 a1 2 a2 3 gnd 4 sda 5 scl 6 wp 7 vcc 8 r63 330 r63 330 c65 .1u c65 .1u r67 100 r67 100 s10 s10 2 1 c69 .1u(nc) c69 .1u(nc) d35 esd d35 esd u5 8051-plcc u5 8051-plcc ea/vp 35 xtal1 21 xtal2 20 reset 10 int0/p3.2 14 int1/p3.3 15 t0/p3.4 16 t1/p3.5 17 p1.0 2 p1.1 3 p1.2 4 p1.3 5 p1.4 6 p1.5 7 p1.6 8 p1.7 9 p0.0 43 p0.1 42 p0.2 41 p0.3 40 p0.4 39 p0.5 38 p0.6 37 p0.7 36 p2.0 24 p2.1 25 p2.2 26 p2.3 27 p2.4 28 p2.5 29 p2.6 30 p2.7 31 p3.7/rd 19 p3.6/wr 18 psen 32 ale/p 33 p3.1/txd 13 p3.0/rxd 11 vss 22 vcc 44 nc 12 q7 mmbt3904 q7 mmbt3904 1 2 3 q6 mmbt3904 q6 mmbt3904 1 2 3 r64 10k r64 10k d32 esd d32 esd rn11 22 rn11 22 1 2 3 4 5 6 7 8 r65 10k r65 10k rn15 10k rn15 10k 1 2 3 4 5 6 7 8 rn14 10k rn14 10k 1 2 3 4 5 6 7 8 c64 .1u c64 .1u rn12 10k rn12 10k 1 2 3 4 5 6 7 8 con1 con1 1 2 3 4 5 6 7 8 tc14 10u/16v tc14 10u/16v r69 1k r69 1k con2 con2 1 2 3 4
? e?8p?t"?! -$&mfduspojd$p -ue $pqzsjhiu-*&/$)"/(&mfduspojd&oufsqsjtf$p -ue /pdpqzejtdmptvsfjt"mmpxfe"mm3jhiu3ftfswfecz-*&/$)" /( model:ai-0088fai-0088af(spec no.:01) 29/239
? e?8p?t"?! -$&mfduspojd$p -ue $pqzsjhiu-*&/$)"/(&mfduspojd&oufsqsjtf$p -ue /pdpqzejtdmptvsfjt"mmpxfe"mm3jhiu3ftfswfecz-*&/$)" /( 1 3 2 4 1 3 2 4 3 3 1 1 2 2 8 8 4 4 5 5 6 6 7 7 model:ai-0088fai-0088af(spec no.:01) 30/239
sp716/SP916 17 / 20 i. pcb layout diagram main board
sp716/SP916 18 / 20 control board inverter + power board top layer
sp716/SP916 19 / 20 bottom layer
sp716/SP916 20 / 20 memo

▲Up To Search▲

Price & Availability of SP916

	To Download SP916 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .